Worked alongside a well-established brand
100g 225g 300g 450g 600g E

100g 225g 300g 450g 600g E

Overview Product Description →Fiberglass Chopped Strand Mat is an non-woven E- or C-glass fiberglass fabric manufactured;
Basic Info.
Application 3 Car, Battery, Wind Blade, Airplane
Application 4 Hand Lay up, Roof, FRP, GRP, etc
Application 2 Swimming Pool, Panel, Entertainment Facilities
Roll Width 4inch - 50inch / 10cm - 300cm
Lead Time 7-14 Days
Roll Weight 30kg, 45kg, 50kg
Binder Emulsion / Powder
Density 80G/M2, 100G/M2, 180G/M2, 225g, 300g, 450g, 600g
Transport Package Carton + Pallet
Specification 80-900 gsm
Trademark HONTED
Origin China
HS Code 7019390000
Production Capacity 1800 Tons/Month
Product Description
Product Description

→Fiberglass Chopped Strand Mat is an non-woven E- or C-glass fiberglass fabric manufactured by spreading continuous filament rovings of 50mm in length randomly and uniformly in combination with polyester binder in power form (or other binder in emulsion form).Chopped Strand Mat (CSM) is a random fiber mat that provides equal strength in all directions and is used in a variety of hand lay-up and open-mold applications. Chopped strand mat is produced by chopping continuous strand roving into short 1.5 to 3 inch lengths and dispersing the cut fibers randomly over a moving belt to from a "sheet" of random fiber mat. A binder is applied to hold the fibers together and the mat is trimmed and rolled. Because of is random fiber orientation, chopped strand mat conforms easily to complex shapes when wet-out with polyester or vinyl ester resins. Chopped strand mats are available as a roll stock product produced in a variety of weights and widths to suite specific applications.

Fiberglass mat (also known as chopped strand mat) has strands of fiber that are randomly oriented and held together with a styrene binder. When a resin is added to the mat, the binder dissolves and the fibers can be moved around.Chopped strand mat is very strong due to the fiberglass fibers compressed together at random angles, can be used for Matched Metal Die wet molding, Open mold applications. Chopped Strand Mat is used to build up thickness quickly and is often layered in between fiberglass fabric. It is compatible with polyester and vinyl ester resin.
Mat Production ProcessAssembled rovings are chopped to a specified length, and then fall onto a conveyor randomly. The chopped strands are bonded together by either an emulsion binder or a powder binder. After drying, cooling and winding, a chopped strand mat is formed.
Emulsion Chopped Strand MatsEmulsion Chopped Strand Mats are made of randomly distributed chopped strands held together by an emulsion binder. They are compatible with UP and VE resins. The roll width ranges from 200mm to 3,120mm. Special requirements may be available upon request.Powder Chopped Strand MatsPowder Chopped Strand Mats are made of randomly distributed chopped strands held together by a powder binder. They are compatible with UP, VE, EP and PF resins. The roll width ranges from 200mm to 3,120mm. Additional demands on wet-out and decomposition time can be available upon request.

Product Features

Excellent weight uniformity
Fast wet out
Easy air releaseExcellent transparency of finished productsExcellent laminate clarityLow resin consumption

Product Parameters


Product codeWeight (g/m2)Binder content (%)Water content (%)

Density: 0.75 oz chopped strand mat 1.5 oz chopped strand mat 2.0 oz chopped strand mat 3.0 oz chopped strand matWidth: 4 inch, 6 inch, 38inch and 50 inch wide or as customers' requirement.


Continuous Filament Mat (also known as continuous strand mat), is a randomly orientated fiber that differs from chopped strand mat because of continuous long fibers rather than short chopped fibers. Continuous filament mat is produced by dispensing molten glass strands directly onto a moving belt in a looping fashion. As the glass fiber cools and hardens and a binder is applied to hold the filaments in place. The mat is then trimmed and rolled. Continuous filament mat is most commonly used in closed molding applications such as, vacuum infusion processing, resin transfer molding, cold molding, and compression molding. With properties similar to those of chopped strand mat, the bulk nature of CFM is advantageous in filling the mold cavity in closed molding processes.

Related Products

→Related Products:

Products Catalog
Packaging & Shipping

Packing and Shipping

Plastic film + carton Non wooden Pallet Container Loading


Unless otherwise specified, the fiberglass products should be in dry, cool and moisture-proof area. The room temperature and humidity should be always maintained at 15ºC~35ºC and 35%~65%. It is best if the product is used within 12 months after production date. The fiberglass products should remain in their original packaging until just prior to user.



100g 225g 300g 450g 600g E-Glass Powder Emulsion Fiberglass Mat / Chopped Strand Mat / Boat Building Swimming Pool Car Automobile Parts Hand Lay up


1. What is your terms of packing?
Generally, we pack our goods in carton with pallet
2. What is your tems of payment?
T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.3. What is your terms of delivery?
EXW, FOB, CFR, CIF,L/C at sight4. How about your delivery time?
Generally, it will take 21 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.5. Can you produce according to the samples? Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
6. What is your sample policy?
We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

7. Do you test all your good before delivery? Yes, we have 100% test before delivery
24 Hours Services Choose us, you will get the key of market!Contact us, we will use the professional knowledge serve you!Wish we can create the great future together!
Send inquiry